The manual pig electric stunner is a hand-held hemp electric tool used by the pig abattoir slaughter line or hog slaughter plant to stun pigs. It can stun the pigs after bathing, leaving the pigs in a short-term coma. It provides favorable conditions for bloodletting, safe production, and improvement of the quality of meat products. Pig stunner is one of the most important pig slaughtering equipment for a small scale pig/hog slaughterhouse processing line. (click here to learn more about pig slaughter line)
During operation, immerse the front and back electrodes of the hemp appliance in the saline solution respectively, make the electrodes have a sponge attached to a small amount of salt water (approximately 75-125 grams of salt per kilogram of water), and then press the electrodes at both ends on both sides of the junction of the eye and the root of the ear of pigs. The numbing time is 2-3 seconds to stun the pigs (the effect is better after the shower).
The biggest advantage of the hand-held hemp stunner over similar products is that it can be adjusted to the ideal standard hemp output voltage when the power peak and the input voltage are high or low.
Matters needing attention:
1. The hand-held hemp stunner appliance box has been well grounded. When using 220V power supply, the power socket must have a good grounding.
2. For the personal safety of the operator, the operator must wear long insulated gloves and insulated shoes to operate. The electrodes at both ends must not touch the human body to avoid danger.
3. The carbon brush should be checked regularly in the normal operation of the voltage regulator to ensure that the carbon brush and the contact part shall not exceed two line widths, and the power supply should be cut off after the work is completed.
- The main technical parameters:
- *Working Voltage: 100-150 V
- *Working Current: 0.5-1.0 A
- *Stunning Time: 2-4 S
- *Voltage Controller Dimension: 50 x 37 x 37 cm
- *Fork Stunner Dimension: 107 x 23 x 10cm